Laminating Machine

• Classification: Cold Laminating Machine
• Application: Particle Board, Fiberboard, Plywood, Film Material
• Driven Type: Pneumatic
• Automatic Grade: Automatic
• Membrane Material: PP PE
• Plastic Film Mulching Modes: Hot Laminating
• Model NO.: SJ-FM105-1200B
• Performance: Waterproof
• Transport Package: Wooden
• Specification: 8 tons
• Trademark: Zhuding
• Origin: Zhejiang
• Production Capacity: 0-60m/Min

Product Description

Model specifications : SJ-FM105-1200B
 

1.Machine characteristics	(1)Effective width of die        1200 mm (2)Finished film width        1000mm (3)Finished film thickness       0.003~0.1 mm (4)Installed capacity          85Kw (5)Composite membrane force          ≥3N (6)Number of die heads           1Pc	Taizhou Changcheng (or the same quality manufacturer specified by the customer)
2.Control cabinet	(1) Temperature control (using digital display temperature automatic controller) (2) 4-zone control of barrel (3) Filter 2 zone control (4) 5 zone control of die head
3.Electrical controlsystem	Electrical control: Note: (Unwind, compound, rewind, host(Each emergency stop switch is set on the control cabinet) (1) Extruder heating system (barrel, filter, die) (2)Frequency conversion speed regulation system of extruder (3)Host forward and backward system (4)Compound part variable frequency speed regulation system Winding speed regulation system (6) Basic unwinding correction system (7) The speed control system of the extruder and the speed control system of the composite part can be adjusted separately or uniformly.	Temperature control is controlled by Schneider AC contactor, low voltage Schneider Omron.
4. Extruder	(1)Screw diameter     Φ105mm (2)Screw length to diameter ratio     28:1 (3)Screw speed      20-60m/min (4)Main motor power 18.5kw frequency control (5)barrel screw material    38CrMoAlA  After nitriding treatment, hardness HV ≥ 970 (6)Screw form Double mixing type (barrier type with mixing head) (7)Barrel heating 28kw Ceramic heating (8) Main reduction gearbox Hardened gear reducer for plastic extruder (9)Forward and backward motor power speed 1.5kw  10m/min (10)Die head hanger-type flat die Laminating width 0.3m-1.2 madjustable (11) Die head material P20, hard chrome mirror surface 0.04-0.06mm inside and outside (12) Effective width of die head 1200mm (13) Die heating form Internal heating (14) Network change mode Manual network change
5.Composite device	(1) Main cold steel roll diameter Φ500 × 1200mm Internal spray coolingHowever, single-in and single-out, the surface is hard-chrome plated (2) Diameter of silicone roller Φ270 × 1200mm 20mmInternal spray cooling (3) Diameter of auxiliary roller: Φ220 × 1200mmInternal spray cooling (4) Compression method Cylinder compression (5) Motor power 7.5kw variable frequency speed regulation (6) Compound linear speed 20-150m / min