Paper Coating Laminating Machine

• Classification: Cold Laminating Machine
• Driven Type: Pneumatic
• Automatic Grade: Automatic
• Membrane Material: Paper
• Plastic Film Mulching Modes: Hot Laminating
• Performance: Waterproof
• Model NO.: SJ-FM105 -1200B
• Transport Package: Stretch Film Packing
• Specification: 1600mm*700mm*200mm
• Trademark: Zhuding
• Origin: Wenzhou China
• Production Capacity: 20~90 M/Min

Product Description

1. Main Technical Parameter
1.1,Diameter of extruder screw: Ø105 mm
1.2,L/D ratio of screw (L/D): 28:1
1.3,Quantity of die: 1pcs
1.4,Arrangement of die and its length: One die parallel with each other, 1000 mm
1.5,Max width of laminating:1200 mm
1.6,Length of rolling roller: 1450 mm
1.7,Speed of laminating: 20~90 m/min
1.8,The power of laminated film separate:≥3N
1.9,Gross Power:65Kw
1.10,Power of extruder motor:28Kw
1.11,Diameter (L×W×H): 16m×7m×2m
 

1. Special configuration of laminating machine

2.1,Special designed cylinder and screw, high precise and adjustable die can make sure the film laminated equality, avoid the die lip leak out material, both the die single side seal ruler are take hand-wheel to adjust.
2.2,Reducer of main machine is equipped with hard-gear gear box
2.7,Laminating rubber roller and laminating iron roller all take water-cooling tank, the water tank made of stainless steel.
2.8,Laminating rubber drive by double gear.
2.9,Laminating firm adopt automatic scrap cutter device.
2.10,Winding system use rubber roller, automatic cutting and winding by friction.
2.11,The whole frame adopt steel board jointed.
2.12,The temperature controller express in digital, relay adopt component parts

3,Main configuration

Code	SJF-1000 Multiply Function Plastic Extruder Lamination Machine Units	Quantity
3.1	Plastic double die main machine	1 unit
3.2	First two position disengage device	1 unit
3.3	Four roller laminating device	1 unit
3.4	Second two position disengage device	1 unit
3.5	Third two position disengage device	1 unit
3.6	Friction winding device and automatic cutter and changing device	1 unit
3.7	Main electronic operation box	1 unit
3.8	Plastic woven bags channel frame	1 unit
3.9	Automatic cutting scrap device	1 unit

1. Main configuration of lamination machine

Code	Configuration	Type	Qty	Production Company	Remark
	Plastic Double Die Extruder
4.1	Screw (Diameter ×L/D ratio)	Ø90×28:1	1	ZHUDING
4.2	Main motor	15kw	1
4.3	Automatic temperature controller	PXW5-TAY-1	8
4.4	Automatic feeder and drying mixer	SAL-300C	1	Suzhou
4.5	Lamination double die	45#	1	ZHUDING
4.6	Two position first disengage machine	Ø1200×2000mm	1	ZHUDING
4.7	Lamination steel roller	Ø400*1000	2
4.8	Cooling rotation connect	1/2 inch	4	Shangdong
4.9	Lamination rubber roller	Ø300×1300	2	ZHUDING
4.10	Main machine hard-gear reducer		1	ZHUDING
4.11	Lamination guiding motor	7.5kw	1	Shanghai
4.12	Two position second, third disengage	Ø1100×1000mm	1	ZHUDING
4.14	Winding machine			ZHUDING
4.15	Winding roller diameter	Ø400×1000	4	ZHUDING
4.16	Max winding diameter	Ø1000
4.17	Pneumatic cylinder	Ø100-400	1	Ruian
4.18	Winding motor	4kw-4P	1
4.19	Guiding roller		27	ZHUDING
4.20	Arc flattening roller	Ø40-1000	2	ZHUDING
4.21

1. Main Electronic configuration and origin:

china famous brand