1. Main Technical Parameter
1.1,Diameter of extruder screw: Ø105 mm
1.2,L/D ratio of screw (L/D): 28:1
1.3,Quantity of die: 1pcs
1.4,Arrangement of die and its length: One die parallel with each other, 1000 mm
1.5,Max width of laminating:1200 mm
1.6,Length of rolling roller: 1450 mm
1.7,Speed of laminating: 20~90 m/min
1.8,The power of laminated film separate:≥3N
1.9,Gross Power:65Kw
1.10,Power of extruder motor:28Kw
1.11,Diameter (L×W×H): 16m×7m×2m
2. Special configuration of laminating machine
2.1,Special designed cylinder and screw, high precise and adjustable die can make sure the film laminated equality, avoid the die lip leak out material, both the die single side seal ruler are take hand-wheel to adjust.
2.2,Reducer of main machine is equipped with hard-gear gear box
2.7,Laminating rubber roller and laminating iron roller all take water-cooling tank, the water tank made of stainless steel.
2.8,Laminating rubber drive by double gear.
2.9,Laminating firm adopt automatic scrap cutter device.
2.10,Winding system use rubber roller, automatic cutting and winding by friction.
2.11,The whole frame adopt steel board jointed.
2.12,The temperature controller express in digital, relay adopt component parts
3,Main configuration
Code SJF-1000 Multiply Function Plastic Extruder Lamination Machine Units Quantity
3.1 Plastic double die main machine 1 unit
3.2 First two position disengage device 1 unit
3.3 Four roller laminating device 1 unit
3.4 Second two position disengage device 1 unit
3.5 Third two position disengage device 1 unit
3.6 Friction winding device and automatic cutter and changing device 1 unit
3.7 Main electronic operation box 1 unit
3.8 Plastic woven bags channel frame 1 unit
3.9 Automatic cutting scrap device 1 unit
4. Main configuration of lamination machine
Code Configuration Type Qty Production Company Remark
Plastic Double Die Extruder
4.1 Screw (Diameter ×L/D ratio) Ø90×28:1 1 ZHUDING
4.2 Main motor 15kw 1
4.3 Automatic temperature controller PXW5-TAY-1 8
4.4 Automatic feeder and drying mixer SAL-300C 1 Suzhou
4.5 Lamination double die 45# 1 ZHUDING
4.6 Two position first disengage machine Ø1200×2000mm 1 ZHUDING
4.7 Lamination steel roller Ø400*1000 2
4.8 Cooling rotation connect 1/2 inch 4 Shangdong
4.9 Lamination rubber roller Ø300×1300 2 ZHUDING
4.10 Main machine hard-gear reducer 1 ZHUDING
4.11 Lamination guiding motor 7.5kw 1 Shanghai
4.12 Two position second, third disengage Ø1100×1000mm 1 ZHUDING
4.14 Winding machine ZHUDING
4.15 Winding roller diameter Ø400×1000 4 ZHUDING
4.16 Max winding diameter Ø1000
4.17 Pneumatic cylinder Ø100-400 1 Ruian
4.18 Winding motor 4kw-4P 1
4.19 Guiding roller 27 ZHUDING
4.20 Arc flattening roller Ø40-1000 2 ZHUDING
4.21
5. Main Electronic configuration and origin:
china famous brand
Audited Supplier 
){kind=link}